Griptape Zwart Longboard Griptape

Jessup Griptape Zwart - Longboard Griptape

Let op! De prijs is per 10cm griptape.

 

Our five star quality formula is used by more professionals and hardcore skaters than any other tape. Our tape sticks tricks! This grip gives you a stable platform for ultimate control! Laminated and Solvent Based Pressure Sensitive Adhesive Layers create rock-solid bonding to all boards in any environment.

Jessup sticks to your board no matter what!* Our “SUPERTOUGH” Silicon Carbide Grip Formula conforms to all deck concaves is easy to trim out and won’t tear like other tapes.Our Silicon Carbide grit never wears out and will outlive any grip tape in the world!* Our superior quality grip tape is available at all authorized dealers. Ask for JESSUP by name! 11 inch wide

Prijs is per 10 cm

€ 0.70

Meerinformatie

Skate Longboard Onderdelen Jessup
Product
 

Trekkoord Sleden

Nijdam - Trekkoord - Sleden

Nijdam Trekkoord. Een trekkoord die bevestigd kan worden aan alle Nijdam Sledes.

  • Lengte: 130CM
  • Materiaal: Polyamide en gelakt hout

€ 4.95

Meerinformatie

Skate Winter Nijdam
Product
 

Icepick IJspriem

Nijdam - Icepick - IJspriem

Een IJspriem is zeker geen overbodige luxe om bij je te dragen met natuurijs.

De Nijdam Icepick nemen niet veel ruimte in beslag en zijn daardoor makkelijk mee te nemen. 

€ 9.95

Meerinformatie

Skate Winter Nijdam
Product
 

Spatborden voor de City Step Onderdelen

Yedoo - Spatborden voor de City - Step Onderdelen

Yedoo spatborden. Makelijk te monteren en geschikt voor de Yedoo City.

€ 27.95

Meerinformatie

Skate Onderdelen Yedoo
Product
 

Poke Longboard Complete

Loaded Poke - Longboard Complete

Dit kleine en wendbare stad monster van Loaded kenmerkt hun pittige bamboe en glasvezel constructie die je helpt bij het carven en het absoberen van ruwere wegen. De Poke beschikt over een kleine nose  en tail zodat je er nog een aantal freestyle tricks mee kan maken, maar in een kleinere, meer draagbaar formaat om door de stad te krijgen.

De Loaded Poke is een voortzetting van de evolutionaire erfenis van de Fish en Ceviche.
De Poke heeft zeer functionele kicktails en een comfortabel platform met concave rocker en flares en maakt elk uitstapje een creatief dynamisch avontuur.

Bekijk ook de andere boards van Loaded

  • Lengte: 34 inch (86cm)
  • Breedte: 9.125 inch (23,18cm)
  • Wielbasis: 20.75 inch (52,71cm)
  • Shape: Double-Kick, Rocker, Symmetrical shape, Topmount
  • Concave: Medium Concave
  • Deck Constructie: Fiberglass/Bamboo
  • Trucks: Paris
  • Lagers: ABEC-7 Speed bearings
  • Griptape: Loaded Grip
  • Trucks : Paris 150 trucks
  • Wheels : 4 Presidents 65mm

Continuing the evolutionary legacy of the Fish and Ceviche the Poke is the newest performance-driven stage of a timelessly delightful tradition. Featuring highly functional kicktails and a comfortable platform with concave rocker and wheel well flares this versatile city commuter keeps up with your every whim and makes each outing a creative dynamic adventure.

History and Inspiration The Ceviche was a beloved member of the Loaded family since its birth in 2008 and like its ancestor the Fish has inspired us and others to dart about on many a lightsome adventure. But over the years our ever-protean riding styles and tastes in equipment continued to metamorphosize and by late 2011 we decided that the Ceviche too needed to evolve. As we designed and tasted several rounds of prototypes we quickly realized that even unidirectional change wasn’t enough to satiate our appetite for new flavor. On one hand we wanted to see the genealogy of the Fish and Ceviche take a new yet familiar form as a pumpable agile and trick-capable city commuter with just the right amount of flex. On the other hand we also lusted after a stiffer street-ready double-kick with inclinations toward freeriding and technical sliding.

The latter as you may have guessed materialized as the Kanthaka which we released in late 2012. And the former led by our personal Beagle expedition to explore the origin of this species has spawned as the Loaded Poke. The Ceviche has been discontinued and Darwin is rolling in his grave. The latest reincarnation of the Fish and Ceviche mellow-mannered cousin of the Kanthaka and little sibling to the Fattail the Poke is driven by performance ergonomics and accessibility. With backgrounds in surf street and freestyle the team of Adam Stokowski Pablo Castro and Danny Carper propelled the development of this new staff favorite.

Design Specifications

  • Length: 34” / 86 cm
  • Width: 9.125” / 23.18 cm
  • Wheelbase: 20.75” / 52.71 cm
  • Tail: 7.625” / 19.37 cm (tip to inner bolt) 18°
  • Nose: 5.625” / 14.29 cm (tip to inner bolt) 13°
  • Concave: 0.5” / 1.3 cm (radial)
  • Rocker: 0.1” / 0.3 cm (centered)
  • Trucks : Paris 180 trucks
  • Wheels : 4 Presidents
  • Bearings : Jehu Loaded bearings

Features Concave: The Poke features 0.5” of radial concave for solid and quick transitions from rail to rail while pumping carving and slashing. Aggressive enough for spirited performance riding yet comfortable enough for the casual commute or boogie through town. Rocker The Fish and Ceviche were both designed with cambered profiles to promote a lively and responsive ride that helped to spring the rider out of hard aggressive carves. While camber did achieve this goal we decided to go with a nominal rocker on this incarnation in order to promote a more locked in feel and comfort in a broader range of riding styles. 0.1” of rocker in the Poke’s standing platform complements the subtle flex of the board and allows you to sink into a comfortable hammock-like interface for both leisurely and aggressive riding. The rocker helps freestyle tricks feel more natural and also creates a solid platform for pushing and commuting. Wheel Well Flares Slight concave flares on either end of the standing platform provide tactile reference for your feet locking you in for quick maneuvers and promoting a high level of board awareness. Additionally these complex contours enhance the torsional stiffness of the deck and promote better stability and control. The Poke’s flares are much more subtle than those on the Kanthaka allowing for a more comfortable interface for an equal mix of thrashing and commuting. Kicktails The Poke sports an ample tail for assertive surf-style slashing and plenty of freestyle trickery. The kick angle has been tweaked from the Ceviche’s design to facilitate a quicker and more functional pop. Moving up to the front of the board the Poke’s nose has also been widened to create a more comfortable platform for manuals and shuvits. The neck areas between the standing platform and both the nose and tail have been broadened to provide more flexibility and security in foot placement. Construction and Production The Poke is built with a vertically laminated bamboo core with triaxial fiberglass top and bottom skins and a bamboo base veneer. This construction allows for a strong lightweight deck with responsive flex. As this board is intended to spend plenty of time both under the feet and in the hands of longboarding freestylers and commuters we decided to take this opportunity to experiment with new textural characteristics on the deck. The bottom bamboo veneer is sealed under a thin layer of hydrogenated bee pollen cured in a honeycomb pattern that lends a unique tactile quality to the Poke and can fight allergies. Conceptually this is also a subtle allusion to fish scales and the Poke’s chordate lineage. Graphics and Griptape The Poke’s graphic was designed by Toms Guerea a.k.a. Screw (www.screw.mx). Conceptually the seafaring creatures illustrated represent lively organic chaos. The fish continues to embody the fluid whimsical and dynamic riding style we love to embrace on this board. And like a happy school of fish (or a big bowl of poke) this board is all about sharing in the experience and riding together with your closest companions. The griptape pattern is cut with an aqueous pattern to subliminally instill an unhealthy obsession with the sea in the mind of the rider thereby inspiring a surfy and fluid riding style.

€ 313.95

Meerinformatie

Skate Longboards Loaded
Product
 

Kegel 80mm Longboard Wielen

Orangatang - Kegel 80mm - Longboard Wielen

De Kegel wheels van Orangatang zijn gemaakt voor snelheid + grip en geven je veel controle. De grote 80mm diameter zorgt voor een hogere (top)snelheid terwijl de 56mm breedte een perfecte balans biedt tussen grip, comfort en snelheid. De naar buiten lopende buitenrand met een recht profiel is ontworpen voor goede grip met constante prestaties terwijl de kortere binnenrand zorgt voor goede tractie en voorspelbare slides. De kern is offset gepositioneerd en heeft een gewichtsbesparende valley-shape.


Specificaties:

  • Diameter: 80mm
  • Breedte: 56mm
  • Contact-area: 56mm
  • Hardheid: 80a (oranje) of, 83a (paars)
  • Bearing position: Offset
  • Formula: Happy Thane
  • Core: high-strength, high-stiffness, heat-resistant urethane
  • Levering: Complete set van 4 wielen

The Kegel is your ticket to high-speed steamroller action and the obliteration of a variety of small mammals. The large 80mm diameter generates high roll speeds while a moderate width of 56 mm allows for a versatile balance of traction and slide response. A cantilevered outer lip with a straight profile is pliable enough to hug the road for grip while also ensuring consistent performance as the wheel wears. The shorter inner lip features a subtle inward bevel for race-worthy traction and predictable drifts. A fully-exposed 46mm core with a deep “valley”-shaped cross section reduces weight while providing good acceleration lots of momentum and crisp slides. This core uses the same high-strength high-stiffness and heat-resistant material we developed and use in the entire Orangatang product line. The Kegel is poured in our Happy urethane formula. Tested and proven over the years in our 75mm In Heat and 70mm 4President race wheels Happy thane has the ideal blend of grip buttery slide consistency and vibration damping for controllable and intuitive downhill performance.


  • Durometer: 77a (Blue) Extra soft and grippy
  • Diameter: 80mm
  • Hardheid: 77a
  • Coreposition: off set
  • Contact Patch ; 56mm

  • Durometer: 80a orange: soft and grippy
  • Diameter: 80mm
  • Hardheid: 80a
  • Core position: Off Set
  • Contact Patch: 56mm
  • Durometer: 83a purple: mid soft and grippy
  • Diameter: 80mm
  • Hardheid: 83a
  • Core position: Off Set
  • Contact Patch: 56mm

 

€ 68.95

Meerinformatie

Skate Wielen Orangatang
Product
 

Race Brake Pad Skate Rem

Powereslide - Race Brake Pad - Skate Rem

Remblok voor de Powerslide UBS Brake / Road Hog Brake.

Prijs is per stuk 

€ 4.95

Meerinformatie

Skate Onderdelen Powerslide
Product
 

Grindrock FLUID II 44mm Grind Wielen

Undercover - Grindrock FLUID II 44mm - Grind Wielen

Stabiliseert je grind voor een betere controle. Werkt zonder kogellagers, klaar voor gebruik. De Grindrocks zijn gemaakt van een sterk en snel vloeibaar materiaal. Perfect voor het vermijden van hang-ups tijdens het grinden.


Grindrock 44mm for Aggressive Inline Skating; no bearing required, out of plastic

shape/radius: flat shape


  • Set of 4

€ 19.95

Meerinformatie

Skate Wielen Aggressive Undercover
Product
 

Space Balls Longboard Lagers

Bear Space Balls - Longboard Lagers

De spaceballs van Bear zijn voorzien van een vaste spacer aan de lagers. Dit zorgt voor minder materiaal en is daarmee sneller en duurzamer.

De lagers zijn geseald met rubber wat het onderhoud van deze lagers uiterst gemakkelijk maakt.

Specificaties:

  • Set van 8 lagers
  • ABEC 7 precisie
  • binnendiameter: 8mm
  • Spacers: build in
  • constructie: staal

The Spaceballs ABEC 7 Skateboard Bearings from Bear. Featuring integrated spacers built-in so your wheels will always be in alignment and chatter-free. Crank down your axle nuts with confidence and keep your wheels rolling smooth straight and fast.

Specifications:

  • Set of 8 Abec 7 Bearings.
  • Inner Diameter: 8mm
  • Spacers: Built-In
  • Construction: Steel
  • Rating: ABEC 7

Bear has a history of making tough and durable products and the Space Balls are definitely that. They feature an integrated spacer and removable rubber shields for cleaning. With integrated spacers built in, your wheels will always be in alignment and chatter-free. Smooth, straight & fast.

€ 20.95

Meerinformatie

Skate Lagers Bear
Product
 

Built in Bearings Longboard Lagers

Zealous Built in Bearings - Longboard Lagers

De Zealous bearings zijn 1 van de betere kogellagers voor je longboard die er te koop zijn. Met de speciale groene rubberen afdichting komt er geen vocht en vuil in je lager en door het speciale nanokeramische vet dat gebruikt is, is deze lager zelfhelend.

De unieke eigenschap van dit vet is hoe de nanokeramische verbindingen kleine oneffenheden automatisch vult. Deze oneffenheden veroorzaken wrijving en hitte waardoor het glijmiddel op die plek uithard. Deze micro coating is 5x harder dan het metaal van de lager zelf en heeft een moluculaire verbinding met het metaal. Hierdoor blijft de rolweerstand minimaal en roest de lager aan de binnenkant bijna niet.

Specificaties

  • binnen diameter : 8 mm gaten
  • ingebouwde spacers
  • Set van 8 lagers
  • nanoceramisch vet

Zealous BearingsPrecision 8mm axle holes.409 built in spacers1mm built in speedringsGreen rubber seals to keep dirt and debris on the outside of the bearing.Lubed with Archoil Nanoceramic Grease-The unique feature of our lubricant is how the nanoceramic compound fills in deformations or asperities in the bearing. These deformations cause friction and heat around them which hardens the nano-ceramic compound to that specific area. This micro coating is 5 times the hardness of the host alloy and has a molecular bond with the host metal filling in all the asperities and eliminating friction over time.

  1. The coefficient of friction is the lowest in the field of Tribology at 0.003% creating a near frictionless surface. Mainly because the nanoceramic compound eliminates all asperities.
  2. Extremely low water washout
  3. Corrosion on the inside of the bearing is nearly eliminated.

Features:

  • Built-in Spacers
  • Built-in speedrings
  • precision 8mm Axle Holes
  • Tight tolerances for minimal play
  • Dual rubber seals keep bearings cleaner longer
  • Custom nanoceramic lubrication
  • Super Quiet
  • Set of 8 Bearings

€ 19.95

Meerinformatie

Skate Lagers Zealous
Product
 

Composite Axle Set Skate Assen

Rollerblade - Composite Axle Set - Skate Assen

Rollerblade skate-assen 8 mm RECREATIE NIEUW Rollerblade composiet frame (kunststof) vervangende as set.

Een set van acht aluminium assen plus een langere remas. Deze as past op de volgende schaatsen: ZETRABLADE, SPARK 80, FUSION X3, SIRIO COMP, SPIRITBLADE & GEOBLADE schaatsen.

Artikelnummer: 00939300000

Pakket bestaat uit 8 normale en 1 remas.

Past op de onderstaande recentere modellen.

Dit zijn de aluminium metalen assen.

 

8 normale assen - 1 remas

Rollerblade Skate Axles 8mm RECREATIONAL NEW Rollerblade composite frame (plastic) replacement axle set.

A set of eight aluminum axles plus one longer brake axle. This axle fits the following skates: ZETRABLADE, SPARK 80, FUSION X3, SIRIO COMP, SPIRITBLADE & GEOBLADE skates.

Artikelnummer: 00939300000

Package includes 8 regular and 1 brake axle.

Fits the below more recent models.

These are the aluminum metal axles.

8 Regular Axles - 1 Brake Axle

Diameterm van de as: 8mm

Lengte van de as: 33mm

€ 9.95

Meerinformatie

Skate Onderdelen Rollerblade
Product
 

Brake Kit Step Rem

Slamm - Brake Kit - Step Rem

Brake kit voor de slamm en osprey steppen.

€ 9.95

Meerinformatie

Skate Onderdelen Slamm
Product
 

Griptape Sheet Camo Griptape

Enuff Griptape Sheet Black - Griptape

Griptape voor je skateboard van het Britse merk Enuff, met kleine gaatjes om deze gemakkelijk zonder luchtbellen aan te brengen. Verkrijgbaar in vele variaties en is geschikt voor zowel skateboards, korte longboards en steppen.

Our popular plain coloured grip tape is now available in more colours than ever before.

All Enuff grip tape is of the highest quality with the perforations to ensure an easy bubble free application

Specification:

  • Size: 9″ x 33″
  • Perforated for easy application

€ 6.95

Meerinformatie

Skate Griptape Enuff
Product